Current Inventory
Browse By Category:
Browse our full inventory:
Low hour Hyundai 35Z-9A Excavator
$1,000.00 - $34,900.00
**Note! Machine is in stock. To keep prices low as possible, we do not accept a full credit card / internet payment on units over $3,500. To prevent an online sale the inventory will remain at 0 but we will have a deposit option for $1,000 which can hold it for you with the remainder of the payment due in cash or certified funds upon pickup**
Hyundai R35Z-9A mini excavator. Enclosed cab with heat, air conditioning and stereo. Optional long arm model with added counter weight for added reach and depth capability, hydraulic thumb, hydraulic bucket coupler, 24" bucket with side cutters and lifting hook, Yanmar diesel engine, suspension seat, approx. 700 hours, operators and parts manuals included. Traded from the original owner who bought it as a leftover in March 2019 - it is a 2017 model year. Newer tracks in excellent condition. Machine has been fully tested and is ready to work. For a financing application please click HERE. NJ sales tax applies. Trade ins up or down considered of commercial landscape or construction equipment.
Gehl R150 Skid Steer w/Joystick
$1,000.00 - $16,900.00
**Note! This machine is in stock. To keep prices low as possible, we do not accept a full credit card / internet payment on units over $3,500. To prevent an online sale the inventory will remain at 0 but we will have a deposit option for $1,000 which can hold it for you with the remainder of the payment due in cash or certified funds upon pickup**
Gehl R150 Skid Loader. 2020 model year, under 600 hours, joystick controls with float and Hydraglide options, Yanmar diesel engine, digital display, auxiliary hydraulic valve block with added case drain and pressure relief, 66" heavy duty bucket with bolt on edge. All for well under $20K!. Way underpriced due to being used for land clearing - it has its fair share of scratches and scrapes consistent with being used in the woods and tight working conditions. This joy stick controlled machine is already set below value and the price is ABSOLUTEY FIRM. NJ sales tax applies unless exempt. Machine is tight, starts and runs excellent, the operation is smooth and confident. For a financing application please click HERE. Trade ins up or down are considered of commercial landscape or construction equipment.
Bobcat S630 Skid Steer
$1,000.00 - $24,500.00
**Note! This machine is in stock. To keep prices low as possible, we do not accept a full credit card / internet payment on units over $3,500. To prevent an online sale the inventory will remain at 0 but we will have a deposit option for $1,000 which can hold it for you with the remainder of the payment due in cash or certified funds upon pickup**
Our low FIRM price is extremely competitive with similar make / model / year, condition, hours and optioned machines - providing a exceptional value for the purchaser.
Bobcat S630 Skid Loader, 2019 model year, approx. 835 hours, Selectable Joystick Controls allows operator to choose from ISO or H style pattern, sensitivity setting and drift control, factory enclosed cab with heat - no air conditioning(its missing the door and the price has been lowered/adjusted), Doosan diesel engine with a plug in block heater for positive cold weather starts, flat free solid tires at 50%, a factory 72" HD bucket is included. This machine starts, runs and operates as it should. The original paint is in good condition... presents a very good overall appearance with normal scratches and scrapes for its age. It does not appear to have been exposed to salt as it is cleaner then most units that have been used for snow removal. A great running loader, fairly optioned at a fantastic price. 3rd party financing may be available, for a financing application please click HERE. NJ sales tax applies. Trade ins up or down considered of commercial landscape or construction equipment.
USA Fork Set - Hydraulic Positioning
$1,449.00
USA made Fork positioners for skid steer or tractor equipped with a loader, standard quick attach system and auxiliary hydraulics. Effortlessly adjusts the fork position width via the auxiliary hydraulics on your machine. No more having to get on and off your skidsteer every time you need to adjust your fork width to fit various applications. 48" forks, rated at 3700lb capacity. Good alternative to nursery forks for lighter duty applications. NJ sales tax applies unless exempt.
Wildkat 72" Skidsteer Dozer Blade
$1,099.00
New made in USA. Wildkat 72" Dozer blade with power tilt for a skid steer loader or tractor equipped with the standard Quick Attach* System and auxiliary hydraulics. A lower cost entry level dozer blade tilts left and right. A great tool for lighter grading, back fill and drainage work.
NJ sales tax applies unless exempt.
** Quick Attach system is commonly found on major brand skid loaders such as Bobcat, John Deere, Gehl, Mustang, New Holland, Case, CAT, Kubota, ASV and many more... most major tractor manufactures are also offering this system on their loaders as well.
USA Skid Steer Rototiller
$1,695.00
Wildkat brand roto tiller for a skidsteer or a tractor equipped with a loader, standard quick attach system, and auxiliary hydraulics. 72 inch working width, bi-directional reversible, up to 3 to 4" depth, made in the USA, hose kit and flat face couplers included. Excellent soil preparator for lawn reseeding, seed bed, garden, food plot, etc... NJ sales tax applies unless exempt. Video below provided by Wildkat/Midstate attachments. Trade ins up or down considered of commercial construction or landscape equipment.
Stout 72-4 Brush Grapple
$2,849.00
New made in the USA Stout brand heavy duty 72" Brush and Log Grapple for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. Closer spaced 4" in-between the tines adds durability and increased filtering of material. Constructed of high quality 50,000 psi steel(many others in this price range are using mild A36 steel in this price range), tine thru design optimizes strength to weight(865lb) ratio, 32" grapple opening, grease-able pins at grapple and cylinder pivots, independent 18" wide grapples adjust to uneven loads, extra bracing at QA wedge, protective sleeves on all hoses, and flat face couplers included. A superior build at this price point and a great value. New Jersey sales tax applies and a receipt for write off from a registered dealer is supplied for all purchasers.
80" Skidtseer Land Leveler
$1,290.00
80" Wildkat Land Plane for a skid steer or tractor loader equipped with standard quick attach. High carbon front and rear cutting edges cut high spots and fill in low spots going forward and reverse. A great planer tool for fine tuning fill and topsoil prior to final rake and seed. New Jersey sales tax applies.
Skidsteer Tree Shear
$1,285.00
GB import tree shear for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. Personally field tested and comfortably sheared branches, limbs and trees up to 5". Having a larger cylinder, additional steel and a larger capacity then the typical economy tree shear... this is a great middle ground alternative where a smaller shear will not be sufficient and the budget does not warrant a far more expensive unit. NJ sales tax applies.
Skeleton Bucket Grapples
$1,195.00 - $1,595.00
Made in the USA. Close tine skeleton grapples for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. Typically used for lighter use screening of rock, brush and construction debris. A popular choice for moving, loading and screening firewood having closer tines and not needing the weight of the typical heavy duty rock grapple. NJ sales tax applies unless exempt.
New Skidsteer Trencher
$1,785.00
One of the best brand and build of the import trenchers...
Wolverine trencher for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. A low cost alternative and being one of the best China imports, having a 60" bar that easily digs a over 36" deep by 7" wide trench. Great for water line, conduit and general utility installation. This attachment comes assembled, adjusted and tested on site. New Jersey sales tax applies.
WK E-Series Root Rake Grapple
$1,399.00 - $1,499.00
E-series root grapple feature lighter weight, double piston / single clamp, pin-on teeth and flat face couplers. A good choice for a smaller 20 to 35hp skidsteer or tractor loader. Will most any skid steer or tractor equipped with standard quick attach and auxiliary hydraulics. Uptight and unobstructed tooth design helps scratch the surface enabling tearing of roots, brush and briars from the ground. A popular choice for land clearing and the like. New Jersey sales tax applies.
Bobcat Skidsteer Wood Chipper
$500.00 - $7,850.00
**Note! To keep prices low as possible, we do not accept a full credit card / internet payment on units over $500. To prevent an online sale the inventory will remain at 0 but we will have a deposit option for $500 which can hold it for you with the remainder of the payment due in cash or certified funds upon pickup**
Bobcat WC8A wood chipper attachment for a skid steer equipped with standard quick attach, 21 + gpm auxiliary hydraulics and the standard 7 pin electrical connector. Works best with Bobcat brand machines utilizing the remote start panel(requires the 7 pin electrical connector). Hydraulic feed, advertised up to 5" capacity, two side hook up capability for convenient operation in tight areas. Fully tested - see demo video below. Worked well on a high flow S250 running at half throttle. Recommended for the loader sizes listed in the manual - see posted pic of compatible machines. New Jersey sales tax applies.
72" USA Skeleton / Rock Bucket
$1,099.00
New KC brand rock / skeleton bucket for a skid steer or tractor loader equipped with standard quick attach system. A nicely built medium duty attachment. 72" wide and approx. 2-3/4" between the tines. Great for screening out rock and debris from sand or soil, filtering soil from concrete and asphalt, also a popular choice for firewood. New Jersey sales tax applies.
78" Skidsteer Mower
$1,285.00
Large area mower attachment for a skid steer equipped with standard quick attach and auxiliary hydraulics. Although I would not consider this a brush cutter, I have used one of these for general field maintenance - mowing buttercups, weeds, smaller brush / briars to help maintain a healthier pasture. One of the better built China imports having a float system, guide wheels, 78" wide, 3 blade system giving a finish mower cut and a robust deck build. Mow from the comfort of your loader while enjoying the advantage of getting through muddy or rough terrain, otherwise inaccessible with a traditional lawn tractor or zero turn mower. New Jersey sales tax applies.
Dingo Style Auger w/bits
$1,535.00
New Arteer brand import post hole digger for the mini / walk behind / ride on skid steer equipped with the Dingo style quick attach. This PHD attachment is the better of the imports - having side to side as well as for and aft swing easing drilling strait holes on uneven ground(some other brands have just for and aft swing). Equipped with the universal 2" hex driveshaft and 12" + 18" bits are included. Built to fit most major brand minis such as Toro, Vermeer, Ditch Witch, Boxer, etc... New Jersey sales tax applies.
USA HD Root Rake Grapples
$2,295.00 - $2,495.00
Brand New, Made in USA, Wildkat HD Root Rake Grapples in various sizes and styles. Standard quick attach mounts to any skid steer or tractor equipped with loader, quick attach system and auxiliary hydraulics. Upright design allows the teeth to scratch, grab, and tear roots., a ideal land clearing tool. 46" opening. Great for brush / debris / brush and root removal, picking up logs, scrap metal, light demolition, ect... These Heavy Duty Models feature far more steel bracing plus structural steel in both the clamp and body, grease able pins, heavier pistons, single clamp / double piston, HD pin on teeth and flat face couplers.
NJ Sales Tax Applies unless Exempt
** Quick Attach system is commonly found on major brand skid loaders such as Bobcat, John Deere, Gehl, Mustang, New Holland, Case, CAT, Kubota, ASV and many more... most major tractor manufactures are also offering this system on their loaders as well.
On Sale
On Sale
USA Built Auger Attachments
$394.00 - $2,985.00
**BITS IN STOCK** We have most size bits in stock, planting and standard. Due to a limited supply we are offering them for purchase with a Lowe brand drive unit only. Inventory will show "0" on bits to prevent the purchase of a bit only.**
New USA Lowe brand auger drive unit in various sizes/strengths in stock for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. Some units capable of driving up to a 48" bit. A Lowe brand PHD is a durable choice for reliable regular use, drilling into rougher/stiffer ground as well as larger units = larger bit capability for planting, footings, etc... 2 year factory warranty on Lowe drive units with purchaser submitted warranty registration. Bits are shown as "0" inventory but are available with the purchase of a drive unit only due to limited supply. A $50 discount(off prices shown)applies to the first 9",12" or 15" bit and a $100 discount applies to one 18" and larger sized bit purchased with a new Lowe PHD drive unit. All units utilize a industry standard 2" hex drive and are made in the USA. Hoses and flat face couplers are included on all drive units. NJ sales tax applies. Feel free to call to discuss which options may work best for you!. All trade ins up or down considered of commercial landscape or construction equipment.
On Sale
On Sale
Standard Quality Snow Buckets
$999.00 - $1,199.00
**REMAINING SNOW EQUIPMENT WILL BE SOLD ON A FIRST COME - FIRST SERVE BASIS, FEEL FREE TO PURCHASE ON-LINE TO RESERVE YOUR UNITS. LOADING IS DONE BY APPOINTMENT(PLEASE CALL TO SET UP A TIME)**
Brand New, Made in USA, WIldkat Snow / Mulch buckets available for a skid steer or tractor loader equipped with the standard quick attach system. A medium duty large capacity bucket nicely built with 6 wear bars, center step for easier machine entry, reinforced top wedge and lower pin brackets, and a pre drilled high carbon leading edge. Skidsteer high volume buckets can have a advantage over a snow pusher box in some applications such as... stacking snow, carrying snow over distance or rough terrain, picking up snow from tight areas, and easy back blading.
NJ Sales Tax applies unless exempt.
** Quick Attach system is commonly found on major brand skid loaders such as Bobcat, John Deere, Gehl, Mustang, New Holland, Case, CAT, Kubota, ASV and many more... most major tractor manufactures are also offering this system on their loaders as well.
USA made Tooth Buckets
$1,095.00 - $1,299.00
New made in the USA Wildkat tooth bucket in various sizes for a skid steer or tractor loader with the standard quick attach system. Similar units listed as heavy duty but we rate them a medium duty. Nicely built at this price point with 6 wear bars(except 60"- 3 bars), 230 style pin on teeth and extra bracing at the lower QA tabs. NJ Sales Tax Applies unless exempt.
On Sale
On Sale
Import Hydraulic Fork Positioners
$899.00 - $1,045.00
Hydraulic Position Pallet Fork sets for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. A economical China import alternative to our USA made offering. No official rating and although I have seen them advertised at 4,000Lb +, we guesstimate 2,700 to 3,000lb capacity. Some customers have used these as a low cost nursery forks for small to mid size plantings. Great for any use where in cab fork width adjustment is desired - forks hydraulically adjust with use of machine auxiliary hydraulics. The Wolverine set(1st 2 pics) has a nicer build quality and hydraulic routing then the AGT Industrial(last 9 pics) built option. All have a removable backmast uppers if desired for easier cab door entry. New Jersey sales tax applies.
Variety of Fork Sets
$535.00 - $1,085.00
Various Fork sets in stock for a skid steer or tractor loader equipped with standard quick attach. New Jersey sales tax applies
- Future brand. Unrated(guesstimate approx. 1800lb). A lower cost import alternative for a tractor or smaller skid loader. With 60" long x 3" wide x 1.3" thick forks. Made in China - $535 each.
- Wildkat brand. These fork sets are rated by the manufacturer as 5,250lb but a realistic evaluation is approx. 4000lb rating. Wildkat comes with 48" long x 4" wide x 1-3/8" thick forks. American made backmast - $845 each.
- Kivel 4200 walk thru. 4200lb rating, with 48" long x 4" wide and 1-3/8 thick MSI(USA) forks. American made backmast - $890 each.
- Bobcat brand walk thru w/sidestep. 4,000lb rating, with 48" long x 4" wide and 1-3/8" thick Cascade forks - $995 each.
- Kivel 5500 walk thru. 5500lb rating, beefed up USA backmast, with 48" x 4" wide and 1-1/2" + Vetter(Germany) forks - $1,085 + tax.
Regulars are listed - we always have a multitude of other makes and models that vary day to day.
USA HD Rock Grapples
$2,695.00 - $2,799.00
Made in the USA Wildkat Heavy Duty Rock Grapple attachment for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. Having approx. 3" between the tines it is commonly used as a tooth screening bucket / grapple - screening dirt to create clean loads of concrete / asphalt or removing rocks and debris leaving cleaner soil behind. USA made with pin on teeth, greasable pins, complete with hoses and flat face couplers. NJ sales tax applies.
USA Brush Cutter / Brush Hog
$3,299.00 - $3,495.00
Wildkat brand bush hog mower for a skid steer loader equipped with the standard quick attach system and standard flow auxiliary hydraulics. Made in the USA, push bar, 7 gauge steel deck (reinforced at motor/gear box, lift brackets, and leading edge), Parker Hydraulic Hoses, Hydraulic drive motor w/ internal cross port and pressure relief box - low flow 14 to 23 max. gpm, Omni Gear box, 3 hinged blade system for better balance and cut. This rotary cutter is advertised by the manufacturer to cut brush, briers, overgrowth, and saplings up to 2 to 3 inches thick. Also suitable for regular field maintenance. NJ sales tax Applies unless exempt.
- 72" (approx. 68" cut) approx. 1,100 pounds
- 80" (approx. 75" cut) approx. 1,300 pounds
Quick Attach system is commonly found on major any brand skid loader such as Bobcat, John Deere, Gehl, Mustang, New Holland, Case, CAT, Kubota, ASV and many more... most major tractor manufactures are also offering this system on their loaders as well.
USA Stump Grapple w/teeth
$1,299.00
This is the real Made in America stump grapple that the Chinese have tried to replicate. Ours has far superior steel, design, teeth, a better piston, pins, hydraulic hoses, couplers, cylinder guard, etc... to the imports.
Made in the USA Wildkat Stump Grapple for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. Equipped with pin on teeth and serrated edges for more effective digging, ripping, and tearing of roots and stumps. This attachment has also been used for planting, trenching, and very light prying up asphalt / concrete, ect...
NJ sales tax applies unless exempt.
On Sale
On Sale
Skeleton Buckets - Choice $899!
$899.00
Choice of new skeleton / rock bucket for a skid steer or tractor loader equipped with standard quick attach. A lighter weight attachment then the HD units. Intended for smaller machines or for lighter work, such as firewood or general cleanup of rock and debris where separating the dirt from the material is desired. Spacing varies and listed in the selection box below. These are not heavy built units and we do NOT recommend using for prying up asphalt, concrete or other abusive uses. We have heavier options available. New Jersey sales tax applies.
Economy Log Splitter
$1,699.00
New import log splitter for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. Although we are seeing these falsely advertised as HD units, we classify them as a lighter duty attachment with a estimated 20 ton ram. It has a 24" opening and a 4 way wedge is included. The inverted design allows one man/operator ground splitting. A value priced China import. Comes complete with hoses and standard flat face couplers. New Jersey sales tax applies.
New Skidsteer Breaker / Hammer
$1,699.00 - $2,085.00
New Agrotk / AGT Industrial / CF Industries 680 hammer / breaker attachment for skid steer loader equipped with standard auxiliary hydraulics and quick attach system. Assembly available... Price of $1,699 is "as shipped" as-is unassembled in the crate, complete with charge kit, hoses(may need extensions) and one chisel point included. Add $386 to have it fully assembled, charged and tested - assembly rate will include hose extensions and flat face couplers. A economical China import alternative to substantially more expensive units. New Jersey sales tax applies. Great for breaking up concrete and asphalt.
On Sale
On Sale
USA HD Grapple Bucket
$1,650.00 - $2,249.00
Brand New, Made in USA Wildkat Heavy Duty Grapple Buckets for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. A nicely built attachment offering additional structural steel, piston upgrade, greasable pins, protective hose routing and parker hoses/flat face couplers. The 66" leftover was special ordered with even thicker grapple tines and is now on sale as a new/leftover. NJ Sales Tax Applies unless exempt.
** Quick Attach system is commonly found on major brand skid loaders such as Bobcat, John Deere, Gehl, Mustang, New Holland, Case, CAT, Kubota, ASV and many more... most major tractor manufactures are also offering this system on their loaders as well.
A50 USA Dingo Style Grapple
$1,699.00
Made in the USA, Stout 38-9 38" brush and log grapple for a mini or walk behind skid steer equipped with the Dingo style quick attach and auxiliary hydraulics. These are NOT cheap knockoffs - instead a excellent quality US made attachment featuring better design, materials, welding, fabrication and features. Made of Grade 50(50,000 psi)steel - providing superior strength without adding unnecessary weight. Approx. 8" between the tines, greaseable pins at the grapple and cylinder, hose sleeves and keeper, 32" opening, standard flat face couplers included. Equipped with the Dingo style mini QA, these will fit brands such as Toro, Boxer, Vermeer, Ditch Witch, and more. Weighing 290lb, providing enough structural steel for strength yet light weight to optimize your loader lift capacity. New Jersey sales tax applies.
Post/Tree Puller
$765.00
Post and tree puller / setter attachment for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. Deluxe model with upper bracing bar helps reduce the possibility of rollback and steadies longer material. Commonly used for pulling posts or shallow root trees up to 6" as well as setting post. A economical import alternative to much higher priced units. Comes complete with hoses and flat face couplers. NJ sales tax applies.
Double Hay Spear
$565.00
2 Prong Hay Bale Spear for a skid steer or tractor loader equipped with standard quick attach. Makes easy work of transport and stacking of round or square bales. A economical import alternative to a more expensive attachment. Nicely built at this price point with center tube and backing plate bracing as well as wide sides, top guard and side step. New Jersey sales tax applies unless exempt.
On Sale
On Sale
78" USA Tooth Bucket
$949.00
$849.00
78" tooth bucket for a skid steer or tractor loader equipped with standard quick attach. A economical American made bucket attachment with weld on teeth. NJ sales tax applies.
On Sale
On Sale
SALE - New/Leftover Demolition Grapple
$2,150.00
$1,650.00
SALE priced. A New Leftover 66" USA Wildkat demolition grapple bucket for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. This attachment was special ordered with thicker 3/4" grapple tines at additional cost for increased durability and heavier work. A new/unused unit with paint blemishes at substantial savings. Nicely built with 6 wear bars, greasable pins, lower attach tab supports, heavier grapple uprights, hoses and flat face couplers included. New Jersey sales tax applies.
72" HD USA Brush Grapple
$2,299.00
New made in the USA Stout brand heavy duty 72" Brush and Log Grapple for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. 8" between the tines. Grade 50 steel, tine thru design optimizes strength to weight(665lb) ratio, 32" grapple opening, grease-able pins at grapple and cylinder pivots, independent 18" wide grapples adjust to uneven loads, extra bracing at QA wedge, protective sleeves on all hoses, and flat face couplers included. A superior build at this price point and a great value. New Jersey sales tax applies and a receipt for write off from a registered dealer is supplied for all purchasers.
Import Auger w/2 bits - 2" hex
$1,385.00
This is better of the PHD imports having the 2" hex output shaft giving added durability to the competition having the 2" round shaft that tends to easily shear the small bolts that fit them.
New Wolverine/Land Honor Post Hole Digger w/bits for a skid steer or tractor loader equipped with standard quick attach and auxiliary hydraulics. Comes with one 12" and 18" bit that have bolt on teeth. We are seeing these and similar units falsely advertised as a "Heavy Duty" attachment... The China Imports are a economical alternative to more expensive units. We also stock a line of real USA made HD units with a warranty viewable on this website. New Jersey sales tax applies.
Show More